Hi,
Located in Ajax, I offer the most complete repair to the " three red rings of death " problem together with top quality workmanship. With over 400 successful repairs having been completed, don't trust your expensive investment to an inexperienced amateur. This is a complete " X " clamp replacement repair and greatly minimizes the design flaw which causes the problem and reduces the likelihood of it's return. The "X" clamps are removed and the heatsinks are then bolted through the case, not just fastened from under the motherboard like the other replacement repairs you'll find being done around the city. This is a far more desirable and effective method of " X " clamp removal which controls motherboard flex due to heat and the resultant broken solder connections. In addition, BGA solder reflow is done using a commercial hot air rework station, motherboard underheater and highest quality Artic Silver 5 thermal paste is used on both the CPU & GPU die sets upon reassembly. I've done many successful repairs for individuals who have been told that their console could not be fixed by other sources. Why is this?....because others are only doing a quick, partial repair operation.
Returning your console to Microsoft (case must not have ever been opened) generally results in a long delay with the problem returning a short time later. Repair of the one red light E-74 error is also available.
Repair rates are as follows:
$20 - DVD drive tray stuck.
$25 - DVD read errors (clean and adjust laser).
$40 - DVD read errors (replace laser).
$40 - 3RROD / 3RLOD (three red rings of death / three red lights of death).
$40 - Audio/no video, lines on screen or freezing.
$40 - Overheating.
$40 - E-74 (all other one red light errors).
I offer a "No Repair / No Pay" policy with a " Fast 60 Minute Turnaround Service " on scheduled repairs along with a " 30 Day " warranty!
" NO console modifications or games are available ". Contact me and get gaming again in no time!
* Just a reminder when choosing a repair source, ask to see the equipment which will be used to repair your console. Simply running the console without the fans Does Not and Will Not reflow lead-free solder. A professional rework station capable of true BGA rework is required to accomplish the 217c+ temperatures necessary for lead-free solder to become liquid, reflow and repair the solder breaks which are causing the error lights. Repairs made without this commercial equipment are no more than quick, temporary "clamping" fixes destined to fail after numerous console thermal cycles. This is because the root cause of the problem (broken/oxidized BGA solder balls) weren't repaired at the ~80c temperatures that running a console without the fans generates but merely clamped allowing the broken solder balls to temporarily make contact. Future motherboard movement/flex caused by heat breaks the contact and the error returns. Without the professional equipment the low cost, "too good to be true" repair offer ends up being just that. Avoid the hassles, have it done right the first time! |
